Be ready when your car lets you down. Jump-start, inflate, light and charge with one rechargeable device.
For compatible 12V vehicles · up to 6.0L petrol / 4.0L diesel
Klarna available at checkout
Free UK delivery
Practical help for the unexpected
Check your vehicle
Check your vehicle handbook and the Revvo instructions before use. Engine limits are manufacturer specifications; battery condition and charge affect performance. Ask us about compatibility.
One rechargeable device
A portable jump starter for compatible 12V vehicles, with stated limits of up to 6.0L petrol or 4.0L diesel. Intelligent clamps include reverse-polarity, short-circuit, over-current, reverse-charge and over-temperature protection. Follow the vehicle and Revvo instructions.
Set the required pressure on the digital display and start inflation. Revvo stops automatically at the selected target. Choose PSI or BAR and stay with the unit while it runs. Inflation does not repair a puncture.
The continuous white work light helps illuminate tyre valves, clamp connections and the engine bay when you are working in a safe parked location.
Charge compatible USB devices from the USB-A output, rated up to 18W. Use a suitable device cable and recharge Revvo after use so power is available for the next time you need it.
Supplied together
USB-C charging cable included. Use the charging equipment specified in the supplied instructions.
Back to the productA little preparation
Allow approximately 4–5 hours for a full recharge via the USB-C input. Use the charging equipment specified in the supplied instructions.
Read the Revvo and vehicle instructions before use. Check vehicle compatibility and locate the correct jump-start points and tyre-pressure information.
Return the unit, clamps, charging cable and inflation nozzles to the EVA case. Follow the manufacturer’s storage guidance and keep the kit securely stowed.
Recharge after use or every three months. Check the charge before a journey and use the device only when the vehicle is safely parked.
| Vehicle system | 12V |
|---|---|
| Petrol engine limit | Up to 6.0L |
| Diesel engine limit | Up to 4.0L |
| Starting current | 500A |
| Peak current | 1500A |
| Battery capacity | 10,000mAh / 37Wh |
| Maximum inflation pressure | 150 PSI / 10.3 bar |
| Maximum stated airflow | Up to 35 L/min |
| Pressure display | Digital, with PSI and BAR units |
| Inflation control | Preset target pressure with automatic shut-off |
| Inflation modes | Car, motorcycle, bicycle and ball |
| USB-A output | 5V / 3A, 9V / 2A or 12V / 1.5A; up to 18W |
| USB-C input | 5V / 2A |
| Full recharge time | Approximately 4–5 hours |
| Recharge interval | After use or every three months |
| Lighting modes | White work light, red SOS signal and red/blue flashing mode; road-use restrictions apply |
| Operating temperature | −20°C to +60°C; this is not a storage or charging temperature rating |
Before you decide
It is specified for compatible 12V vehicle systems, with engine limits of up to 6.0L petrol or 4.0L diesel. Check your vehicle handbook and the Revvo instructions before use. If you are unsure, contact us before ordering.
No. Revvo adds air; it does not seal a puncture or repair tyre damage. A tyre that is damaged, loses pressure or has been driven flat needs professional assessment. Do not assume reinflation makes it safe to drive.
No second vehicle is needed for the jump-start function. Revvo must be sufficiently charged, the vehicle must be compatible, and both the vehicle and device instructions must be followed.
Yes, it stops at your selected target pressure. Use the pressure specified for your vehicle and tyre, not the inflator’s maximum rating. Stay with the device during use and follow the operating and cooling instructions.
Fully charge it before first use, then recharge after use or every three months. A full recharge takes approximately 4–5 hours. Usage, temperature and battery condition affect the available charge.
Follow the manufacturer’s storage guidance and keep it securely stowed. The quoted −20°C to +60°C range is an operating specification, not confirmation of safe year-round storage or charging temperatures.
Compatible USB devices can be charged through the USB-A output, rated up to 18W. Use a suitable cable for your phone. The USB-C port is the charging input for Revvo.
Do not assume compatibility. Check the vehicle manufacturer’s instructions for its 12V system and confirm suitability before use. Revvo does not charge a vehicle’s high-voltage traction battery.
Use it only when the vehicle is safely parked and the conditions allow. It does not replace breakdown assistance. Do not attempt vehicle repairs beside fast-moving traffic or in a motorway breakdown situation.
Do not assume the flashing mode is permitted for UK roadside warning use. Vehicle-lighting restrictions apply. Use the continuous white work light for local illumination where safe, without dazzling other road users.
Revvo Jump Pack, smart clamps, a USB-C charging cable, inflation nozzles and a moulded EVA case. Use the charging equipment specified in the supplied instructions.
REVVO · 4-IN-1
Revvo Jump Starter & Tyre Inflator
View product availability